EK Water Blocks 3831109849699 computer cooling system part/accessory Fitting by EK Water Blocks
- Be the first to review
- Item Number: FD3021584
- Part Number: 3831109849699
| 16 IN STOCK |
£15.79 Incl. all UK VAT and taxes
|
Ships in 7 days Shipping to United Kingdom only £ 2.99! |
Key Features
- Fitting
- 1/4"
- Material: Brass
- Satin steel, Titanium
See product description
Similar Products
-
Phanteks G 1/4 Computer Cooling System Adapter Fitting - Chrome
IN STOCK
£ 6.15 (incl. VAT) -
Phantek Soft Tube Fitting 13/10MM Soft Tube Fitting
IN STOCK
£ 11.31 (incl. VAT) -
Corsair Hydro X Series XF 90° Hardware Cooling Accessory Fitting- White, 2-Pack
IN STOCK
£ 28.39 (incl. VAT) -
Phanteks Rotary Hard Tube 12MM Fitting - Chrome
IN STOCK
£ 18.64 (incl. VAT) -
Phanteks Glacier 12mm Hard Tube Rotary Fitting 90 - Chrome
IN STOCK
£ 18.64 (incl. VAT) -
Corsair Hydro X Series 90° Rotary Adapter - Gold, 2-Pack
IN STOCK
£ 25.70 (incl. VAT) -
Corsair Hydro X Series XF 13/10mm Hardware Cooling Accessory - Black, 4-Pack
IN STOCK
£ 30.47 (incl. VAT) -
Phanteks 13/10MM G1/4 Soft Tube Fitting - Chrome
IN STOCK
£ 10.91 (incl. VAT) -
Corsair Hydro X Series XF 90° Hardware Cooling Accessory Fitting - Black, 2-Pack
IN STOCK
£ 22.97 (incl. VAT) -
Corsair Hydro X Series 90° Hardware Cooling Accessory Fitting - White, 2-Pack
IN STOCK
£ 21.76 (incl. VAT) -
Corsair Hydro X Series XF Hardware Cooling Accessory Rotary Y-Splitter - Black
IN STOCK
£ 16.41 (incl. VAT) -
Phanteks Glacier 12mm Hard Tube Rotary Fitting 90 - Black
IN STOCK
£ 19.44 (incl. VAT) -
Corsair Hydro X Series Hardware Cooling Accessory - Black
IN STOCK
£ 30.22 (incl. VAT) -
Bitspower Computer Cooling System 90-Degree With Dual Inner G1/4" Extender - Matte Black
IN STOCK
£ 12.98 (incl. VAT) -
PHANTEKS Glacier M-F G1/4 Rotary Adapter
IN STOCK
£ 9.36 (incl. VAT)
Details
EK-Quantum Torque Micro Rotary adapter fittings allow you to make a simple 90° turn in the smallest possible footprint and installation height. With an overall installed height of just 21mm, Torque Micro Rotaries can squeeze into the most difficult places where it would be otherwise impossible to make a bend. This means it is 10mm lower in height than the standard 90° EK-Quantum Torque Rotary angled fitting.
This Quantum Line adapter fitting is CNC-machined from a solid brass bar and protected with a high-quality satin Silver finish. The two parts of the fitting are permanently assembled and sealed with high-quality rubber O-rings. Satin Titanium EK-Quantum Torque series fittings are intentionally not painted on the inside to reduce the level of possible pollutants in the loop. This precision manufacturing ensures satisfying engagement and a consistent appearance.
Since there is no space for conventional knurling, the base of the fitting extends through an opening in the top face where a 6mm Allen key has to be used to secure it in place. Once secured, the body of the fitting is free to rotate in either direction. EK recommends the use of the EK-Loop Multi Allen Key for this application.
A male G1/4” thread is screwed into the desired port, and a fully rotatable joint allows the female G1/4” port to be directed in any perpendicular direction. You can install components in very close proximity thanks to this.
The centreline of the female G1/4" port is 12.5mm above the mounting surface, the EK-Quantum Torque Micro Rotary 90 rotary angled adapter is compatible with any STC or HDC EK-Quantum Torque fitting and EK-Quantum Torque Micro HDP fittings. The width and overall diameter of the base is 16.5mm.
This Quantum Line adapter fitting is CNC-machined from a solid brass bar and protected with a high-quality satin Silver finish. The two parts of the fitting are permanently assembled and sealed with high-quality rubber O-rings. Satin Titanium EK-Quantum Torque series fittings are intentionally not painted on the inside to reduce the level of possible pollutants in the loop. This precision manufacturing ensures satisfying engagement and a consistent appearance.
Since there is no space for conventional knurling, the base of the fitting extends through an opening in the top face where a 6mm Allen key has to be used to secure it in place. Once secured, the body of the fitting is free to rotate in either direction. EK recommends the use of the EK-Loop Multi Allen Key for this application.
A male G1/4” thread is screwed into the desired port, and a fully rotatable joint allows the female G1/4” port to be directed in any perpendicular direction. You can install components in very close proximity thanks to this.
The centreline of the female G1/4" port is 12.5mm above the mounting surface, the EK-Quantum Torque Micro Rotary 90 rotary angled adapter is compatible with any STC or HDC EK-Quantum Torque fitting and EK-Quantum Torque Micro HDP fittings. The width and overall diameter of the base is 16.5mm.
Specifications
| COLOR | Satin steel, Titanium |
| MATERIAL | Brass |
| CONNECTING THREAD | 1/4" |
| DIAMETER | 1.65 cm |