Alphacool 11968 computer cooling system part/accessory Water block by Alphacool
- Be the first to review
- Item Number: FD3055987
- Part Number: 11968
| 1 IN STOCK |
£31.53 Incl. all UK VAT and taxes
|
Ships in 8 days Shipping to United Kingdom only £ 2.99! |
Key Features
- Water block
- 1/4"
- 0.8 bar
- Material: Acetal, Copper, Nickel
- Black
See product description
Similar Products
-
Corsair Hydro X Series XC7 RGB PRO White Water Block
IN STOCK
£ 85.00 (incl. VAT) -
EK Quantum Torque Water Block Plug - Black
IN STOCK
£ 6.81 (incl. VAT) -
EK Vector RE RTX 3080 3090 Water Block Active Backplate
IN STOCK
£ 125.33 (incl. VAT) -
Corsair Hydro X Series XC7 RGB PRO Black CPU Water Block
IN STOCK
£ 89.90 (incl. VAT) -
EK Quantum Vector RE RTX 3080/3090 Water Block
IN STOCK
£ 151.97 (incl. VAT) -
EK Quantum Vector FTW3 RTX 3080/3090 Water Block Backplate
IN STOCK
£ 135.03 (incl. VAT) -
EK Water Blocks Computer Cooling System - Backplate
IN STOCK
£ 40.88 (incl. VAT) -
Ek Quantum Vector RTX 3080/ 3090 Water Block
IN STOCK
£ 135.01 (incl. VAT) -
EK Water Blocks Computer Cooling System Accessory Backplate
IN STOCK
£ 42.04 (incl. VAT) -
Alphacool Eisblock Aurora GPX-N RTX 3080/3090 Turbo With Backplate - Black
IN STOCK
£ 132.77 (incl. VAT) -
EK Water Blocks Computer Cooling System Backplate
IN STOCK
£ 129.74 (incl. VAT)
Details
SSDs in M.2 format are becoming increasingly popular. The high transfer rates and extremely low access times allow faster and more effective working or playing on the PC. Alphacool offers the HDX Apex Acetal M.2 2280 SSD cooler so that the full performance of the M.2 2280 SSD can be used permanently. It is a useful addition to any water circuit and ensures that the M.2 SSD memory can release its full potential.
Why an active M.2 cooler?
Due to their design, M.2 SSDs are only able to deliver their maximum performance for a short time. The controller chip heats up extremely quickly and begins to throttle the performance of the M.2 SSD at an early stage in order to avoid overheating. Independent tests have shown that during write operations, the transfer rates of uncooled M.2 SSDs can drop after just 30 seconds. With read processes, the throttling usually occurs a few seconds later. With the Alphacool HDX Apex Acetal M.2 2280 SSD cooler, the maximum performance of the SSD can be used over a significantly longer period of time. This is clearly noticeable during longer read and write processes.
Mounting
The HDX Apex Acetal cooler is compatible with M.2 2280 SSDs that are mounted on one or both sides. If the PCB is populated with memory chips on both sides, the 0.5mm heat conduction pad is used on both sides. If memory chips are only installed on one side, then the 1.5mm heat conduction pad is used on the side without chips. Once the top and bottom of the SSD have been fitted with thermal pads, the SSD memory is pushed into the retaining clip and mounted under the cooler. The installation on the mainboard is then carried out as usual. The cooler can now be integrated into the water circuit using the existing G1/4" connections.
Copper instead of aluminium!
Alphacool only uses copper in its water coolers. The reason is simple: copper has almost twice the thermal conductivity of aluminium and is therefore the obviously better choice of material for a water cooler.
Why an active M.2 cooler?
Due to their design, M.2 SSDs are only able to deliver their maximum performance for a short time. The controller chip heats up extremely quickly and begins to throttle the performance of the M.2 SSD at an early stage in order to avoid overheating. Independent tests have shown that during write operations, the transfer rates of uncooled M.2 SSDs can drop after just 30 seconds. With read processes, the throttling usually occurs a few seconds later. With the Alphacool HDX Apex Acetal M.2 2280 SSD cooler, the maximum performance of the SSD can be used over a significantly longer period of time. This is clearly noticeable during longer read and write processes.
Mounting
The HDX Apex Acetal cooler is compatible with M.2 2280 SSDs that are mounted on one or both sides. If the PCB is populated with memory chips on both sides, the 0.5mm heat conduction pad is used on both sides. If memory chips are only installed on one side, then the 1.5mm heat conduction pad is used on the side without chips. Once the top and bottom of the SSD have been fitted with thermal pads, the SSD memory is pushed into the retaining clip and mounted under the cooler. The installation on the mainboard is then carried out as usual. The cooler can now be integrated into the water circuit using the existing G1/4" connections.
Copper instead of aluminium!
Alphacool only uses copper in its water coolers. The reason is simple: copper has almost twice the thermal conductivity of aluminium and is therefore the obviously better choice of material for a water cooler.
Specifications
| MATERIAL | Acetal, Copper, Nickel |
| THREADS | 1/4" |
| OPERATING TEMPERATURE | 60 °C |
| COLOR | Black |