Flow Control: IEEE 802.3x Flow Control and Back Pressure
Jumbo Frame: 9KB
MAC address Table Size: 2K
Packet Buffer Size: 1Mbits
Network Connector: 5 x RJ-45 10/100/1000M auto negotiation, 1 x RJ-45 10/100/1000M with IEEE802.3bt In, 4 x RJ-45 10/100/1000M with IEEE802.3at Out
Auto MDI/MDI-X function, Full/Half duplex
Network Cable: UTP/STP Cat.5e or above Cable, EIA/TIA-568 (100m)
Protocol; CSMA/CD
LED:bt (Green):ON-PoE IEEE 802.3bt is detected, OFF-PoE IEEE 802.3bt is not detected, PWR (Amber):, ON-Power is detected, OFF-Power is not detected, PoE (Amber): ON-PSE is activated and PD is detected
LNK/ACT (Green):ON-TX port is detected, Flashing-TX data is transmitting/receiving
Reserve polarity protection: Present
Overload current protection: Present
Power Consumption: 3.9W without PoE load
PD power input: 30W/60W/90W
PoE Power: Maximum total PSE power output 60W
Operating Temperature: -40°C to 75°C
Operating Humidity: 5% to 95% (Non-condensing)
Storage Temperature: -40°C to 85°C
Housing: Rugged Metal, IP30
Case Dimension (L x W x D): 103.5 x 32 x 81.5 mm
Installation mounting: DIN Rail Mount or Wall Mount
Industrial 5-Port Gigabit PoE Extender with 1-Port 802.3bt PoE to 4-port 802.3af/at Operating temp.: -40°C to +75°C
- 5-Port 10/100/1000BASE-T Gigabit RJ45 Interface - Thunder, Lightning resistant - Built-in hardened PoE and PD controller - Can be cascaded up to 4 units or 500meters - Works in extreme environment -40°C to +75°C - Data Processing: Store and Forward - Flow Control: IEEE 802.3x Flow Control and Back Pressure - Jumbo Frame: 9KB
This PoE extender is equipped with 1 PD input to power up 4 Giga PSE output. It can be used as a standalone PD/PSE PoE injector or to extend PoE distance. It can be cascaded up to 4 units or 500 meters to deliver high power for your end device.