Scythe FUMA 2 120mm CPU Cooler by Scythe

Twin-Tower-Design

The classic twin-tower design of the Fuma 2 is not centered directly above the CPU socket, but offset by inclined heatpipes. This asymmetrical design provides maximum space for the memory banks. Also the cooling fins of the second tower are aligned in such a way that even memory banks on both sides of the CPU socket can be operated without problems, without restricting the effectiveness of the heat sink. Despite the enormous cooling surface of the Fuma 2 remains at a height of 154.5 mm and fits into any standard PC case.

Dual Fan Reverse Airflow

The Fuma 2 CPU cooler comes with two fans, a Kaze Flex 120 and a Kaze Flex Slim 120, which rotate in opposite directions. This creates a higher static pressure and an increased and more stable air flow. Furthermore a third fan can be mounted for extra power. Additional fan brackets are included.

Kaze Flex Fans

Both the regular model as well as the Kaze Flex Slim fan use a sealed fluid dynamic bearing (Sealed Precision FDB) that reduces friction and wear to a minimum thanks to a special oil film. Rubberized bearing surfaces have a decoupling effect and prevent the transmission of noise and vibrations.

H.P.M.S. III (Hyper Precision Mounting System III)

The Fuma 2 CPU cooler uses the proven H.P.M.S III mounting system. A pre-assembled mounting bar with spring-loaded screws ensures balanced pressure distribution. During the installation, the adaptable backplate is securely held to the mainboard by rubberized spacers, making the process considerably easier. The mounting system offers full compatibility with all current sockets including AMD's AM4 and Intel's LGA 2066.